Windows LiveWindows Live™
 
 
Matt's profileHD ViewPhotosBlogLists Tools Help

Blog
    September 22

    Announcing the Microsoft Image Composite Editor

    Today we are very pleased to announce the Microsoft Image Composite Editor.  It is a free download available today from here.  This application is the best image stitching tool that we have shipped to date.  The stitching technology from the Interactive Visual Media Group has shipped previously in Windows Live Photo Gallery and more recently in Deep Zoom Composer.  The core stitching engine in the Image Composite Editor uses the same advanced matching and blending techniques that I described in my Deep Zoom Composer blog entry.  Beyond that this application adds the following features:

    • A GPU accelerated orientation adjustment tool.  Sometimes the automatic stitching software doesn't quite get the viewing direction correct, or perhaps you want to use a rectilinear projection instead of a cylindrical projection.  This new tool allows you to interactively make these adjustments. 
    • 360 blending support.  Our fast poisson blend technique now creates a seamless 360 blend.
    • Output to Photoshop layers.
    • Create an HD View web page.
    • Create a Silverlight Deep Zoom web page, including new 360 support in our Silverlight application.
    • Integration with both the Windows Shell and the next version of Windows Live Photo Gallery, so that you can quickly launch a new stitching project.

    Please try it out today, and let us know what you think.

    -Matt Uyttendaele

     

    P.S. We will be giving demos at the Photokina show all week.  If you happen to be attending, please stop by the Microsoft booth to see this and a lot of other great technology.

    10:56 PM | View trackbacks (5) | Blog it

    Comments (16)

    Please wait...
    Sorry, the comment you entered is too long. Please shorten it.
    You didn't enter anything. Please try again.
    Sorry, we can't add your comment right now. Please try again later.
    To add a comment, you need permission from your parent. Ask for permission
    Your parent has turned off comments.
    Sorry, we can't delete your comment right now. Please try again later.
    You've exceeded the maximum number of comments that can be left in one day. Please try again in 24 hours.
    Your account has had the ability to leave comments disabled because our systems indicate that you may be spamming other users. If you believe that your account has been disabled in error please contact Windows Live support.
    Complete the security check below to finish leaving your comment.
    The characters you type in the security check must match the characters in the picture or audio.
    Matt Uyttendael​e has turned off comments on this page.
    Matt Uyttendael​ewrote:
    Hi Jamie,

    Yep. The research and code comes from the Interactive Visual Media team in MSR. I did a write-up on this for the Wave2 launch of WLPG: http://hdview.spaces.live.com/blog/cns!1AD33AA162CE96C2!506.entry

    -Matt
    Dec. 10
    Jamie Thomsonwrote:
    Am I right in thinking that the Photostitch function in WLPG comes straight out of the research done by your team?

    -Jamie
    Dec. 8
    John OBrienwrote:
    @ HDView
    Awesome, I look forward to seeing the project on codeplex. Big thanks for taking the time to answer questions on your blog, it makes a huge difference. Thanks for taking the extra time.
    John.
    Sept. 24
    Paulwrote:
    @hdview

    As most panopics are shot in a sequence - wether with a robot or manual with some kind of panohead on a tripod - it could increase detection time and precision, if there is an option to tell the program the number of rows and columns, rows first or columns first, top to down or bottom to top, form left to right or right to left.

    Autopano Pro is just adding this, PTGUI is able to consider templates.

    Thanks
    Paul
    Sept. 24
    Matt Uyttendael​ewrote:
    @Paul
     
    I haven't used the gigapan stitcher, but I imagine that you give it an indication of how the gigapan head moved.  ICE doesn't have that so it needs to work it out from the input images.  In a future version we should add a mode that allows users to indicate that the images were shot using an automated head.
     
    Thanks for the feedback. 
    Sept. 24
    Paulwrote:
    @HDView

    Thanks for looking at my pictures.
    It would be fine, if ICE throws a message when it is running into problems.
    Stitching only CB-08 and CB-09 freezes ICE on my PC.

    ICE has some stitching problems on the stairs in front of the main building too.
    The gigapan stitcher is not confused by the fountain, so may be some improvements on ICE are possible.

    - Paul
    Sept. 23
    Thomas Kruegerwrote:
    ...and don't forget our IVRPA.org live-stiching-booth at the Photokina. I bet that you will find a computer with a running Microsoft Image Composite Editor competing against Hugin, PTGui, AutoPanoPro and PTAsssembler!
    Sept. 23
    Matt Uyttendael​ewrote:
    @Paul

    I took a look at your pictures.  The issue is that the overlap between two of the images (CB-08 and CB-09) is almost completely taken up by a water fountain.  All of the motion in the water is making it difficult for the program to find any correspondence between these images. 
    Sept. 23
    Matt Uyttendael​ewrote:
    @John

    Great question.  We are in the process of putting it up on Codeplex.  It should be there shortly.  I'll post a note on this blog when we've done it.

    There is a slight issue with autocrop and 360.  Autocrop finds the largest rectangle that it can.  But in the case of a 360, it should instead opt for the largest rectangle that is still a 360.  What probably happened in your case is that it actually did omit a few pixels on left and right, so those angles where technically correct, and by changing them you will see a slight mismatch at the seam.  The best way to work around this is to use autocrop for the top/bottom values, but then use the text boxes to set the left/right to 0 and full-width.  HD View is a bit more lax about having to be a full 360, so it allows scrolling even if there is a small gap, perhaps we should do the same in the Silverlight code.

    Sept. 23
    John OBrienwrote:
    @HDView, spot on about the silverlight 360. I had used the autocrop and although this did not effect HDView it did the followin ght HTML for silverlight:
    thetaMin="0.165005"
    thetaMax="359.835022"
    Setting to 0 and 360 worked! thanks.
    So my next question.... any chance of sharing the Silverlight source code so we can use these cool new feature and enhance for our own apps?
    Sept. 23
    Paulwrote:
    Impressive speed, BUT:
    I feeded ICE with 13 pics of a horizontal pano, but only 8 were stitched.
    No error message.

    - Paul
    Sept. 23
    Matt Uyttendael​ewrote:
    @John.

    Hello.  I probably should have described that 360 Deep Zoom feature in more detail.  What that means is that if the pano is a 360, then our Silverlight code will do a continuous scroll in the horizontal direction.  If you aren't seeing this behavior then please have a quick look in the generated html.   There should be a script block with the following elements:

            thetaMin="0"
            thetaMax="360"

    If this isn't the case then is it possible that you cropped the image before exporting?

    Sept. 23
    Michael Palermitiwrote:
    Congrats guys! ;-) 
    Sept. 23
    Picture of Anonymous
    William Dowell wrote:
    ok, it works but not within google's chrome browser.. :S
    Sept. 23
    Picture of Anonymous
    William Dowell wrote:
    the link seems to be dead.. for x86... (ftp://ftp.research.microsoft.com/downloads/730cd6bb-6450-4e66-8101-a94e71cb0779/SetupICE_x86.msi)
    Sept. 23
    John OBrienwrote:
    First Impression, Vista64bit support awesome! Speed is really quick, output options a plenty. Tested with a 56MegaPixel 360 of Sydney Harbour and it was seemless.
    Got a 360 working in HDView but no luck in Silverlight - is there a trick?
    "including new 360 support in our Silverlight application"
    John.
     
    Sept. 23